Road Racerz is proudly supported by our readers. Products purchased through links on our site may provide us a commission. Learn More
Are you looking for a more efficient set of lights for your motorcycle? Most bikes come with xenon or halogen lights that use lots of power and don’t last quite long. Luckily, there’s a solution.
Opting for LED lights brings more benefits and advantages than drawbacks. These look fantastic, but there’s also the question of cost-efficiency.
LED uses less power while delivering bring lights, increasing your bike’s visibility. For this reason, they’re the best type to go for if you’re looking to upgrade.
Are you struggling to choose? Continue reading to discover some of the top LED lights for motorcycles and their pros and cons. We’ve also included a detailed buyer’s guide with info to help you pick one.
10 Top Rated Motorcycle LED Lights
DITRIO – Best Fitting
This is a 12-volt DC system with a waterproof switch available in three sizes. It’s one of the best to opt for if you’re looking for easy installation that doesn’t require much skill.
The kit comes with two wireless remotes, featuring voice control. You can use it to set the lights to follow the beat and rhythm during a party, for example.
It creates fifteen static color combinations with seven solid colors. It includes red, green, yellow, white, purple, blue, pink, orange, and teal. All the strips are waterproof and have separate silicone tubing, which increases the overall brightness.
The strip is quite flexible, allowing you to easily apply them with some adhesive tape. It bends and curves, which makes it simple to add to any mounting location.
Bliifuu – Best Design
These motorcycle strips come in several sizes. The package includes 4 x 12.9’’ strip, 4x 9’’ strip, and 4 x 4.9’’ strip so that you can customize your bike in any way you want.
It’s ideal for fenders, engines, body vents, under seats, and cowl openings since each strip can be cut to fit. The neon effect increases nighttime visibility and safety.
It’s a multi-color set, featuring 18 static colors, two-cycle modes, three flashing modes, and a single fading mode. It connects to a Bluetooth wireless app, allowing some added control in seconds. Plus, the set comes with a 4-key remote controller.
All the strips are flexible and sticky, making the installation quite simple regardless of the location on your motorcycle.
TACHICO – Best App Control
You should check Tachico if you’re looking for LED lights to control via an app. The set includes 12 strips of 18 colors and extension wire, making the installation process easier.
This one is among the best choices when it comes to app control. The app is simple and easy to use, although you’ll get a traditional remote as well. Voice control option features a microphone and music so that your LEDs can follow the beat.
The 18 static color combination and seven colors make the set quite versatile. However, there’s blue among the colors, so make sure that it’s legal to use in your area.
Each of the strips is waterproof and separated by silicone tubing.
It’s flexible, making it easy to apply to pretty much any part of your bike.
Brightronic – Best Easy Installation
This one comes with 10 IP66 LED strips, each measuring 3.94 inches in length. When connected, the strip is long enough to reach all parts of your bike.
It comes with remote control with four buttons allowing you to control its 15 static color modes. It’s easy to use to go from color jumping to fading and many other modes.
Each strip comes with adhesive tape at the back, which makes installation as simple as ever. Since they’re flexible, you can add them to any part of your bike that doesn’t heat.
The set also includes a few spare parts like tape for the controller, 2m of extra wire, extra fuse for the controller, and 2pcs Y-type terminal.
It offers up to 50,000 lighting hours in total.
HRDJ – Best for Night Riding
HRDJ is a good option if you want to increase your nighttime visibility. It works in fog, rain, and has an on/off switch, allowing you to control it at any time. These LEDs make it easy to show your taste and create a visual impact.
The 16pcs kit comes with two wireless remotes with voice control. This allows you to set the lights to follow the beat of any music or sound. It works great at parties when you need something else to create a nice atmosphere.
It has 15 static color combinations for you to use depending on your style and taste. Plus, each strip is flexible and waterproof, which means it’s easy to install and resistant to rain.
It works on all vehicles with DC 12V power, although its design is best suited for motorcycles.
NBWDY – Best Universal
If you have a few bikes you want to decorate, you might want to check NBWDY. It’s one of the most versatile and universal kits that’s simple to install.
It’s bright and flexible, so you can easily install it even if you don’t have any experience with LEDs. The strips are waterproof, which means they can work in different weather conditions.
The kit comes with six strips, four-key metal key fob, and fifteen flashing patterns. It’s a plug and play kit, so the entire installation process won’t take much time.
You can use each strip individually, depending on how you want to decorate your bike. All the pieces can be installed anywhere on the vehicle using double-sided tape.
They’re universal and suitable for motorcycles, scooters, cars, cruisers, and trucks.
SUPAREE – Best Waterproof
If you live in an area where it often rains, you should consider this set of LEDs. It’s a pack of twelve flexible strips that feature stick tape for easier installation.
The set comes with wireless remote control for more straightforward use. It also comes with a 150cm extension cable for larger motorcycles.
This one has 15 static colors and several lighting modes, making it suitable for different situations. It features multi-color brightness and wireless turn on/off function. The colors included are red, blue, pink, yellow, green, white, and red-blue.
It fits most motorcycles as it features several mounting options.
Because it’s so flexible and easy to work with, the set is customizable. It works on motorcycles, trailers, scooters, cruisers, and snowmobiles.
AMBOTHER – Best Adjustable
These LED strips are meant for 12-volt motorcycles. It’s a set of 16 colors, 2-color cycle mode, three flashing mode, and a single fading mode.
All the strips are durable and waterproof, meaning that they’re suitable for different weather conditions. It’s rated IP68 waterproof, meaning that it’s safe to use in heavy rain as well.
It’s quite simple to install thanks to the sticky tape on the back. The flexible design allows you to place them pretty much anywhere on the bike, depending on the look you’re going for. These strips are ideal for all the bent areas where other products might not fit.
It features five levels of brightness, multiple colors, and several lighting modes.
The kit comes with a dual remote, making it easier to select colors and modes.
OPT7 – Best Ultra-thin
If you’re looking for a set of thin lights, you should check OPT7. It features 16 afterglow colors and several lighting modes for you to choose from.
You can go from flash and fade to dimming options, controlling them with wireless remote control that’s included in the package. Plus, there’s a switch that goes onto your handlebar for easier control.
The set includes ten flexible strips that glow on both sides. This allows versatile use so that you can light both sides of your bike equally and in no time.
Because they’re ultra-thin, the strips are hidden and only visible once you light the colors. Another thing worth noting is that these are waterproof and ready to use right out the box.
NINEO – Best Multi-Color
Nineo is among the best choices if you’re looking for a multi-color LED that’s easy to use. The set comes with eight strips and eighteen color options for you to choose from. It features four modes, such as fading, brake, flashing, and static.
It comes with a wireless remote, allowing you to control the colors and modes from afar. It makes the overall use much more straightforward, especially if you’re using the lights for a party or an event.
When it comes to motorcycle use, it’s important to note that these are waterproof. This allows you to ride in the rain without worrying that the lights might burn out.
Each strip features self-adhesive 3M tape, allowing easy mounting on different parts of your bike.
Guide to Choosing the LED Lights
Most lights come with dual-sided adhesive tape. While this tape is easy to use, it’s also not the most durable solution since it tends to weaken over time.
One of the things you should do to prevent LEDs from falling off is to clean the surface thoroughly. Use a degreaser and some rubbing alcohol to clean the area where you’ll apply the strip. Avoid placing LEDs on or near the areas that heat or move.
Also, use some adhesion promoter or some extra adhesive tape to secure the strip in place.
LED Strip Setup
One of the most common failures happens with connectors. It occurs when dirt enters to connectors or when a wire breaks at some point. However, there are easy ways to prevent this during installation.
Reinforce the connection between the wire and connector with some epoxy or hot glue. This will strengthen the connection a bit while also act as a sealant against grease and dirt.
During setup, you can apply dielectric grease inside the splices. This will keep out dirt and moisture. However, make sure to avoid placing splices or connectors in locations where they would move. Also, avoid areas that tend to heat.
Most LED sets come with a fuse, which is often the tube glass type. These aren’t as reliable as two-pronged plug-in ATM types, so consider replacing them if possible.
However, make sure that the fuse’s amperage is the right fit for the smallest wire in the installation. It has to match appropriately, or it might not work for a long time, if at all.
LED Strip Kits
Most LED strip kits consume power even when they’re turned off. This drains your battery even when you’re not using them or riding the bike at all.
The best way to avoid this is by using a separate switch. This would allow you to turn off the entire system whenever you intend to leave the bike parked for more than eight hours.
Legal Colors and Effects
The laws on LEDs tend to vary from state to state, which is why you should check this beforehand. Note that all states have specific laws that relate to unlawful motorcycle alterations and the use of accent lighting.
Some states forbid alterations and lights, depending on the color, type, and location on the motorcycle. Generally, LED lights are legal as long as they’re concealed and shut off during riding. This means you can’t ride your bike when it’s lit up in 16 different colors.
You’re safer off not using flashing lights and those that include blue and red. Again, it’s okay to use these colors, just not while riding.
Why LED Lights Are Important
Increase Battery Life Span
As we mentioned, LED consumes less energy than any other type. This helps you have a fantastically lit bike without putting as much stress on your battery.
Another benefit worth mentioning is the excellent durability of LED lights. Most kits last up to 8 to 10 times longer than halogen, which makes them more cost-efficient.
Can Focus on Particular Area or Object
Most strips are flexible and versatile. This allows you to use them on pretty much any spot of your bike as long as it’s not hot or too curved.
As we said, hot and curved areas might decrease the strength of the adhesive that’s holding the piece in place.
Still, you can choose any other area where you want to install them. Most strips are flexible, and you can combine them with other strips and wrap them around different objects as well. The sky is the limit as long as you avoid excessive heat.
Most riders opt for installing LEDs underneath their bikes in a concealed place. This way, you can’t actually see the strips, but you can see the lights, and the result is pretty eye-catching.
Safety is always the most critical factor in riding a motorcycle, which is why you should always wear appropriate gear. However, you can also use LEDs to improve your safety.
Because bikes are quite narrow, it makes it a bit tricky for other riders to notice them and judge their distance and speed. In most cases, this is the reason behind as many collisions with motorcycles and cars.
To help avoid this, you can use LED strips to increase the perceived width of your motorbike. However, we suggest that you check if this is legal in your country.
As we said, most LED kits include flexible and adjustable strips. This may or may not be important to you, depending on where you want to install the lights. Still, it adds to the overall versatility and ease of use, so it’s worth considering.
Flexible strips are easier to work with, and they’re more versatile in terms of where you can install them.
LEDs can significantly improve your visibility when riding during low-light or nighttime conditions. Some are even great to use in fog or rain, making your bike a bit more visible on the road.
Again, check if it’s legal to light up your LEDs when riding in your state.
Can Add Protection When Breaking
Many LEDs can serve as brake lights, alerting other drivers for when you’re braking. Some are flashing while others are not, but either way, they add lots to your overall safety, especially during fog.
In most cases, LEDs light up 20% faster than any other type, so they’re worth considering if you’re often riding in different weather.
Consume Less Energy
Frequently Asked Questions
What are the best LED lights for motorcycle headlights?
You can use LED as headlight, but you’d need a specific type of product that’s meant for the purpose. The strips we reviewed, especially those that are colored, aren’t made to work as a headlight.
Your headlight should be the right size and power, and of course, color.
What are the best LED brake lights for motorcycles?
Brake lights engage when you press the brake on your motorcycle, and many of the products we reviewed can serve this purpose as well.
This depends on the power as well as fusing that come with the lights. Installing these requires a bit more skill, so it’s often best if you’d have a professional help you with this.
Brake lights are ideal for improving your visibility during nighttime and low-light conditions.
What's the greatest LED motorcycle tail light?
Many people tend to confuse tail lights with brake lights. However, while brake lights turn on when you use the brake, tail lights engage when you turn your headlights or when your parking brake is on.
There are some great LED motorcycle tail light products in the market, ranging in size, power, and ease of use. These are usually recommended because they don’t consume as much battery life and are generally more cost-efficient than other types of tail lights.
At this point, we’re sure that you’ve picked one of the top LED lights for your motorcycle from our list. These are the top of what the market currently offers, so it’s just a matter of finding the particular product that fits you the best.
Hopefully, the information from our buyer’s guide helped you choose. The factors we discussed are the most important things you should keep in mind when buying LEDs. Still, remember to consider your own needs and preferences, as well.